[Mine Machine Detailed]How to set up WhatsMiner M20S?
How to get on the shelf WhatsMiner M20S
WhatsMiner M20S is famous for its high computing power, up to 68T, power consumption ratio of 48W/T, support SHA256 algorithm, can dig BTC, BCH and BSV. Many miners will choose this mine.
The setting of WhatsMiner M20S is similar to that of other WhatsMiner.
Of course, no matter what brand of miners, before power is turned on and before shelving, one thing must be done is:
Check if there is any problem with the wiring. Is it plugged in? Is there a reverse insertion? Is there any loosening? They are all to be determined; besides, they should check whether the radiator has fallen off or not, so that they can shake the miner gently and listen to the noise.
Of course, if you have hundreds or thousands of mining machines, it is estimated that such inspection is enough. If there is no better and easier way, it can only be so. Because, if there are these problems, after the power is turned on, it is easy to have bigger problems, and even the whole miner may be destroyed.
WhatsMiner M20S
WhatsMiner M20s
How to Search and Obtain WhatsMiner M20S IP Address
WhatsMinerTools software needs to be prepared. The download address is:
https://qiniu.microbt.com/files/1561713724/WhatsMinerTool-3.4.6.zip?attname=WhatsMinerTool-3.4.6.zip
Power the miner, connect the wire and so on. After success, the yellow light and the flashing green light will be on the wire interface.
Make sure that the miner and the computer are in the same network segment.
Then run Whats Miner Tools software on the computer, select "Detect and Set IP", in the pop-up window, according to the specific circumstances of the room number, rack number, layer number, location, number of steps to set, and then click "Start".
WhatsMiner M20 Detection and IP Settings
Then press the "IP Found" button on the miner control panel, next to the wire interface, for about 5 seconds.
Back to Whats Miner Tools, you will see the IP, MAC address and location of the miner reported.
How to allocate the mine pool and miners?
Get the dynamic IP address above, enter this address in the browser's address bar, and you can enter the miner's background.
The background username and login password are admin by default.
Enter "CGMiner" and modify the mine address, miner name, etc. After confirming that it is correct, click "Save & Apply" to save.
After preservation, CGMiner will need to be restarted before it takes effect.
Select "Status", enter "CGMiner Status", and then select "Restart CGMiner", and CGMiner will be restarted.
Of course, if you don't restart CGMiner, you can also choose to restart the control panel. Select System, go to Reboot, and click Perform reboot.
After a successful restart, check whether the information of the mine pool and miners has been set up successfully.
What is the miner's running state?
Still the "CGMiner" interface above. Status - > CGMiner Status.
Finally, in the operation of the WhatsMiner M20S excavator, there are several points to be noted:
1. When carrying and putting on shelves, do not take them through various wires. It's better to carry them with both sides of your hand.
2. WhatsMiner M20S Miner acquires dynamic IP by DHCP by default, so you need DHCP server in your mine network, or DHCP dynamic allocation IP address on the router.
3. If Whats Miner Tools software fails to query the IP of the miner, first check whether it is in the same network segment, whether the network has DHCP service, and whether it has pressed the IP Found button. If it's all done or not, restart it. Press the "Reset" button on the miner for about 5 seconds (which will restore the factory settings), then turn off the power and restart the miner. After about 30 seconds, press "IP Found" again to see if it's OK.
4. If you don't press "IP Found", the software automatically detects the IP address. It may be that the "IP Found" button is blocked. Through the MAC address bar code of the mining machine panel and the MAC address displayed in the software, find the corresponding problem mining machine, power off the corresponding mining machine, reinstall the control board, so that the button can be exposed. If you can't install it, ask your seller.
5. You can also set static IP, which can be modified in the Configuration - > Interfaces of the Miner Background.
6. If you find that the calculating power is too low after the operation of the miner, wait another 15 minutes or so. Because after the mining machine runs, it will automatically carry out frequency search test, which takes about 15 minutes. This process is not a formal mining stage.
7. Pay attention to the speed of the fan, which can judge the temperature of the miner. If the speed reaches 6100 or more, the mine will automatically reduce the frequency and the calculation power. We need to do a good job of cooling measures. Of course, the fan speed can not be 0, if it is 0, it is generally because of the fan connection problems.
8. The running state interface of the mine's backstage is a good thing. Calculating power, temperature, fan speed and so on are very clear, which can help you find and eliminate problems and faults in time. If not detected, then decisively power off, check the connection of various lines._WhatsMiner M20S
WhatsMiner M20S is famous for its high computing power, up to 68T, power consumption ratio of 48W/T, support SHA256 algorithm, can dig BTC, BCH and BSV. Many miners will choose this mine.
The setting of WhatsMiner M20S is similar to that of other WhatsMiner.
Of course, no matter what brand of miners, before power is turned on and before shelving, one thing must be done is:
Check if there is any problem with the wiring. Is it plugged in? Is there a reverse insertion? Is there any loosening? They are all to be determined; besides, they should check whether the radiator has fallen off or not, so that they can shake the miner gently and listen to the noise.
Of course, if you have hundreds or thousands of mining machines, it is estimated that such inspection is enough. If there is no better and easier way, it can only be so. Because, if there are these problems, after the power is turned on, it is easy to have bigger problems, and even the whole miner may be destroyed.
WhatsMiner M20S
WhatsMiner M20s
How to Search and Obtain WhatsMiner M20S IP Address
WhatsMinerTools software needs to be prepared. The download address is:
https://qiniu.microbt.com/files/1561713724/WhatsMinerTool-3.4.6.zip?attname=WhatsMinerTool-3.4.6.zip
Power the miner, connect the wire and so on. After success, the yellow light and the flashing green light will be on the wire interface.
Make sure that the miner and the computer are in the same network segment.
Then run Whats Miner Tools software on the computer, select "Detect and Set IP", in the pop-up window, according to the specific circumstances of the room number, rack number, layer number, location, number of steps to set, and then click "Start".
WhatsMiner M20 Detection and IP Settings
Then press the "IP Found" button on the miner control panel, next to the wire interface, for about 5 seconds.
Back to Whats Miner Tools, you will see the IP, MAC address and location of the miner reported.
How to allocate the mine pool and miners?
Get the dynamic IP address above, enter this address in the browser's address bar, and you can enter the miner's background.
The background username and login password are admin by default.
Enter "CGMiner" and modify the mine address, miner name, etc. After confirming that it is correct, click "Save & Apply" to save.
After preservation, CGMiner will need to be restarted before it takes effect.
Select "Status", enter "CGMiner Status", and then select "Restart CGMiner", and CGMiner will be restarted.
Of course, if you don't restart CGMiner, you can also choose to restart the control panel. Select System, go to Reboot, and click Perform reboot.
After a successful restart, check whether the information of the mine pool and miners has been set up successfully.
What is the miner's running state?
Still the "CGMiner" interface above. Status - > CGMiner Status.
Finally, in the operation of the WhatsMiner M20S excavator, there are several points to be noted:
1. When carrying and putting on shelves, do not take them through various wires. It's better to carry them with both sides of your hand.
2. WhatsMiner M20S Miner acquires dynamic IP by DHCP by default, so you need DHCP server in your mine network, or DHCP dynamic allocation IP address on the router.
3. If Whats Miner Tools software fails to query the IP of the miner, first check whether it is in the same network segment, whether the network has DHCP service, and whether it has pressed the IP Found button. If it's all done or not, restart it. Press the "Reset" button on the miner for about 5 seconds (which will restore the factory settings), then turn off the power and restart the miner. After about 30 seconds, press "IP Found" again to see if it's OK.
4. If you don't press "IP Found", the software automatically detects the IP address. It may be that the "IP Found" button is blocked. Through the MAC address bar code of the mining machine panel and the MAC address displayed in the software, find the corresponding problem mining machine, power off the corresponding mining machine, reinstall the control board, so that the button can be exposed. If you can't install it, ask your seller.
5. You can also set static IP, which can be modified in the Configuration - > Interfaces of the Miner Background.
6. If you find that the calculating power is too low after the operation of the miner, wait another 15 minutes or so. Because after the mining machine runs, it will automatically carry out frequency search test, which takes about 15 minutes. This process is not a formal mining stage.
7. Pay attention to the speed of the fan, which can judge the temperature of the miner. If the speed reaches 6100 or more, the mine will automatically reduce the frequency and the calculation power. We need to do a good job of cooling measures. Of course, the fan speed can not be 0, if it is 0, it is generally because of the fan connection problems.
8. The running state interface of the mine's backstage is a good thing. Calculating power, temperature, fan speed and so on are very clear, which can help you find and eliminate problems and faults in time. If not detected, then decisively power off, check the connection of various lines._WhatsMiner M20S
评论
发表评论